| 加工定制是 | 品牌SHOWA |
| 型号SH-1MN | 种类压力 |
| 制作工艺集成 | 输出信号开关型 |
| 材料金属 | 材料物理性质导体 |
| 材料晶体结构非晶 | 防护等级IP68 |
| 线性度6.26%F.S. | 迟滞1.65%F.S. |
| 重复性0.054%F.S. | 灵敏度1.2654 |
| 漂移1.25 | 分辨率1.054 |
代理sh-500kn sh-1mn昭和showa压力传感器
日本showa测量仪器有限公司，1962年在日本以制造生产应变计开始起步。专注于应变计领域，不断研究开发。考虑到“高科技计测量仪器是未来的科学和技术发展必不可少的”，昭和开始致力于改善和发展外围设备，称重传感器，压力传感器，扭矩传感器，放大器，显示器等测量工具。因此，产品应用于各种工业消费和研究领域，具备精度高，可靠性强等特点。
日本showa位移传感器displacement transducrs
日本showa加速度传感器acceleration transducers
日本showa特殊传感器special transducers
日本showa压力传感器pressure transducers
日本showa扭矩传感器torque transducers
日本showa测压元件load cells
日本showa应变片strain gages
日本showa动态应变放大器dynamic strain amplifiers
ac strain amplifiers models 5683 / 5684 dc strain amplifier model 5693
传感指示器transducer indicator－ds-6000
一、"sh" / shear beam type and small
tension & compression load cells selection table
sh-1kn sh-2kn sh-5kn sh-10kn sh-20kn sh-50kn sh-100kn sh-200kn sh-500kn sh-1mn
she-5kn she-10kn she-20kn she-50kn she-100kn she-200kn she-500kn she-1mn
she-5knu she-10knu she-20knu she-50knu she-100knu she-200knu
she-5knlh she-10knlh she-20knlh she-50knlh she-100knlh she-200knlh
shu-10kn shu-20kn shu-50kn shu-100kn shu-200kn shu-500kn shu-1mn
rct-5kn-201 rct-10kn rct-20kn rct-50kn rct-100kn rct-200kn rct-500kn rct-1mn
rcb-50n rcb-100n rcb-200n rcb-500n rcb-1kn rcb-2kn rcb-5kn
rct-10ne rct-20ne rct-50ne rct-100ne rct-200ne rct-500ne rct-1kne rct-2kne rct-5kne
dbu-50n dbu-100n dbu-200n dbu-500n dbu-1kn dbu-2kn dbu-5kn
bux-100n bux-200n bux-500n bux-1kn bux-2kn bux-5kn
cux-10n cux-20n cux-50n cux-100n cux-200n cux-500n cux-1kn cux-2kn cux-5kn
wbu-10n wbu-20n wbu-50n wbu-100n wbu-200n wbu-500n wbu-1kn wbu-2kn
wbe-50n wbe-100n wbe-200n wbe-500n wbe-1kn wbe-2kn wbe-5kn wbe-10kn
wbs-50n wbs-100n wbs-200n wbs-500n wbs-1kn wbs-2kn
wbj-02n wbj-03n wbj-05n wbj-1n wbj-2n
wbfj-03n wbfj-05n wbfj-1n
dbj-1n dbj-1.5n dbj-2n dbj-3n dbj-5n dbj-10n dbj-20n
代理sh-500kn sh-1mn昭和showa压力传感器
wst-18德国gte工业门通用控制单元，紧凑型控制模块用于高速门，推拉门机保护门，护栏，卷闸门，轧设备，截闸，摆闸和折叠门门，型号：wst-18
the wst-18 concept has been specially designed for use on doors and gates. one of the main features of the control unit is the universal configuration, its modularity and the program structure which enables specific customised designs.
the control unit offers an extensive range of functions which can be easily set via the segment display in connection with the rotary switch. at the same time, the operation and menu structure are always the same and the menus that cannot be used are blanked.
conventional limit switches, inductive limit switches or a digital limit switch des from gfa-elektromaten gmbh can be connected to the control unit. using a drive with des will enhance the number of options even more. the end positions can be easily and conveniently programmed, for example. this is especially helpful for places which are difficult to access and considerably eases the workload.
in its standard design, the control unit comes equipped with two additional output relays. these output relays can bee freely configured with an array of available functions. as a result, it is possible to set up a basic position indicator or a red/green traffic light control, for example.
using the rm 44 i/o relay card, which is available as an optional extra, another 4 output relays can be switched. in doing so, the adaptation is detected automatically and the menus on the wst-18 extended accordingly. this means that the additional 4 relays can be individually supplied with one of the functions out of the range available which significantly increases its use for specific solutions. on top of this, permanent configurations can be pre-selected such as traffic light control to regulate the right of way or forward command for centrally controlling a second drive immediately via dip switches.
the wst-18 unit has been produced in line with the high standards prescribed under en 61508.
代理sh-500kn sh-1mn昭和showa压力传感器
美国sti传感器总型号：gt160 gt16 gt180 gt18 it20 gt270 gt27 ft110 st130 st120 gt10 gt100 ft31 ft29 ft290 ft26 ft260 ft11 gt2250 gt32 gt320 it30 gt200 st35 st350 st15 st150 st1300 dt190 dt14 dt140 nitrogen pumping pt36 hammer union gt21 gt25 gt2450 gt23 pnc700 ap50 ap5202 ap5201 ap5103 ap5101 lpa60 lps60 mounting blocks dt19 min800 cnr960 cnr960 coiled tubing pnc772 pnc770 pnc760 pnc740 pnc720 pnv710 rde900 vlc856 vlu850 min845 min840 min835 min830 min822 min811 min802 llu60 lms60 lmu60 ldp990 bem980 cth932 dth920 rde915 rde905 rde900 lls62 lls61 lls60 llc65 llc62 llc61 llc60 llu65 llu62 llu61 lys60 lyc65 lyc61 lyc60 lyu65 lyu61 lyu60 lss61 lsu61 lls65 pt17 t28 pt170 lwu65 lwu61 lwu60 lzu60 lzs60 lys65 lys61
压力传感器gt160
产品简述：
gt160系列压力传感器是高精度毫伏/电压输出传感器专为应用在非常苛刻的测试环境。gt160系列压力传感器提供了一个独特的小尺寸的组合，0.1%的静态精度，增强热精度和扩展的工作温度范围达到预期在这些严格的条件下的结果。所有的gt160单位由焊接不锈钢。标准压力范围是15磅到40000磅在gage和引用。所有的gt160压力传感器的耐冲击和振动。一个全面的选择压力端口，电气端子，和温度补偿范围可供选择。每个单位都附带了一个标准的19点校准可溯源到nist的记录。
通用压力传感器（高精度）
●
量程
15-40,000
psi
●
模拟输出
2
mv/v
●
测量精度
0.10
％fso
●
工作温度
-34/+76
°c
●
压力种类
g,a,v,c